Calibration of the spectrograph

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #4998

    alex
    • Senior Member
    • ★★★★

    Hello,

    I notice that the spectra that I am measuring using a Spectrograph model V10E 2/3’’ and a camera model Imperx IPX-2M30 are descalibrated (a shift of approximately 12 nm).

    How can I recalibrate the system?

    I am using the ENVI software.

    Thanks in advance!
    Alex

    #5000

    CytoViva-Jamie
    Moderator

      Hello Alex, what leads you to believe that the spectrograph is out of calibration?
      We calibrate them here before shipping and unless they are physically jared or turn where the camera an spectrograph meet then it should be fine.

      Thanks!
      Jamie

    Viewing 2 posts - 1 through 2 (of 2 total)

    You must be logged in to reply to this topic.