Measurement range

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #3484

    alex
    • Junior Member
    • ★★★

    Hello,

    If order to reduce the time that is required to capture a hyperspectral image can I select the range in which the spectrum is performed. For example instead of measuring between 400-1000 nm can the camera measure only between 500-600nm?

    Thanks,
    Alex

    #3485

    CytoViva-Jamie
    Moderator

      Hello Alex! No, unfortunately the spectral range is set inside the spectrograph so subsetting the range will have to be done after the scan is complete. This can be done in the ENVI software.
      Thanks!
      Jamie

    Viewing 2 posts - 1 through 2 (of 2 total)

    You must be logged in to reply to this topic.